The AriStar 110 watt Turbo RV solar charging kit is an intermediate solar power system with future expansion in mind.  It also comes with a 1750 watt Go Power modified sinewave inverter to power your plug-in items while out camping.

   Our 110 watt RV solar kit comes complete and ready to install.  The only thing not included in the box is the labor to put it all together.  Believe me, if we could find a way to squeeze it in there, we would.

   Your kit comes with a Mitsubishi 110 watt solar panel, solar panel mounting feet and well nut kit to secure to the roof, 25 feet of sunlight and water resistant tray cable ( no conduit necessary ), Go Power 1750 watt modified sinewave inverter with 10 foot inverter leads and in-line safety fuse, and Solar Boost / Blue Sky Energy 2000E charge controller.  Nice controller, digital display, and utilizes MPPT ( maximum power point tracking technology ), Go Power 1750 watt modified sinewave inverter with 10 foot inverter leads and in-line safety fuse.

   What's that??  Well, a quick lesson charge controllers.  Most 12 volt solar panels produce about 17 volt while charging and most 12 volt batteries only charge up to about 14.4 volts.  What a standard charge controller does is take that extra volatge and turn it into heat, basically wasting it.  What a MPPT controller does is take that extra voltage and turn it into more current.  What that equates to is as much as 20% more power coming out of your solar panel VS. a standard charge controller.  If you do a lot of camping or plan on expanding your system later on down the road, I feel the extra cost of the MPPT controller is well justified.  If you're just a once in a while weekend camper, I would recommend you stay with out standard kits.

   The Mitsubishi 110 watt solar panel measures 26" x 56" and under most sunlight conditions will produce about 550+ watts of power per day.  That's enough to keep up with your lights, water pump, furnace blower, and with the inverter will allow for use of a microwave, coffee pot or other smaller plug in items.

   This kit is usually in stock and ready to ship out anytime.  We typically ship out UPS or FedEx Ground and a freight estimate is about $65-$85 depending on your location in the US.  There is no sales tax charged on orders outside of California. 

   A good battery bank for this kit would be two 6 volt or two 12 volt deep cycle batteries.